MicroNet SP5058 Manuale Utente Scaricare il pdf (Pagina 15)

-13-

 Access Point name: enter a name for the Access Point.

 The SSID: displays the SSID of the Access Point. The SSID is a unique name shared

among all points in your wireless network. The SSID must be identical for all points in

the network, and is case-sensitive. Leaving this field blank means using the SSID “any”

and connecting to an Access Point with the strongest available signal.

 Channel: select a channel from the drop-down list, which is the shared channel among

all points in a point-to-point mode. The permissible channels depend on the regulatory

domains.

 Basic Rates: select the basic rates by placing a check in required boxes. The basic rates

should be set based on the speed of the wireless network. You must select 1 –2 Mbps if

older 802.11 compliant equipment resides on your network, such as wireless adapters

that support only 1 or 2 Mbps. However, selecting 1 –2 Mbps does not limit the basic

transfer rate of faster adapters.

 Supported Rates: select all the supported rates at which the client with communicate

with the Access Point by placing a check in the required box.

 Transmission Rate: select a supported transmission rate from the drop-down list, or

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 25 26

Nessun commento

MicroNet SP5058 Manuale Utente Pagina 15